Sale!

Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone

For Pro Film, TV & Location Recording
Moisture-Resistant for Humid Conditions
No Switches, Buttons, or Dials
40 Hz to 20 kHz Frequency Response

EXTENDED WARRANTY IN LATIN AMERICA

$989.10

ESTIMATED SHIPPING DATE October 12, 2023 - November 2, 2023

CHECK INTERNATIONAL SHIPMENT OPTIONS HERE

Seeking a better price? Open a business or dealer account

To negotiate additional discount, click the button below “ASK FOR A QUOTE“

SKU MKH416-P48 Categories Audio, Directional Microphone, Microphones Tags Brazil, Latin America

Sennheiser MKH-416 Overview

Achieve superb audio capture in demanding conditions for your next professional film, TV, or location recording with the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone. Mix-ready sound quality is provided by its sharp directivity, low noise, and strong output. Plus, there are no controls to worry about; the MKH 416-P48U3 delivers the reliability you need for high-pressure gigs.

The microphone exhibits a hypercardioid polar pattern at low to midrange frequencies and transitions to a lobar pattern in high frequencies, allowing it to attenuate 125 Hz to 2 kHz by approximately 10 dB at the 90° off-axis points. Your dialogue, foley, and sound effects can be recorded with full dynamics and clarity, thanks to the MKH 416-P48U3’s wide frequency response, enhanced consonant articulation, and high SPL handling.

Performs in Adverse Environmental Conditions

When your work takes you outdoors, you’re bound to encounter humidity and condensation, which can cause many mics to fail. The MKH 416-P48U3’s RF condenser design makes it highly immune to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions.

Professional Sound Quality

The MKH 416-P48U3 was engineered with the experienced professional in mind. Its 40 Hz to 20 kHz frequency response incorporates a gentle rise from 5 to 15 kHz to increase intelligibility, and a natural bass roll-off to mitigate rumble. Its low self-noise of 13 dBA and high sensitivity of -32 dB enable studio-worthy signal purity without requiring noise reduction and gain boosting in postproduction.

Phantom Powered

The MKH 416-P48U3 boasts a transformerless and fully floating balanced output for optimal signal integrity. Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the MKH 416-P48U3 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Boompole Mounting

The MKH 416-P48U3’s metal body features a matte black finish to prevent distracting visual reflections. Mount the MKH 416-P48U3 directly on a stand or boompole using the supplied MZQ 100 clip. Alternatively, place the MKH 416-P48U3 in the separately available Sennheiser MZS 20-1 combination shockmount, pistol grip, and stand adapter to prevent the transfer of vibrations to the microphone.

Windscreen Minimizes Wind Noise

The MKH 416-P48U3 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, consider the Sennheiser MZH 60-1 furry windshield (available separately).

Sennheiser MKH-416 Specs

Microphone

Form Factor	Stand/Boom-Mount
Sound Field	Mono
Operating Principle	Line Gradient
Capsule	Condenser
Polar Pattern	Lobar, Supercardioid
Orientation	End Address
Circuitry	Solid-State
Pad	None
High-Pass Filter	None
Tone Adjustment	None
Indicators	None
On-Board Controls	None
Windscreen	Foam (Included)

Performance

Frequency Range	40 Hz to 20 kHz
Maximum SPL	130 dB SPL
Off-Axis Rejection	3 dB at 60° 20 dB at 120° 15 dB at 180°
Impedance	25 Ohms
Load Impedance	800 Ohms
Sensitivity	-32 dBV/Pa at 1 kHz
Equivalent Noise Level	13 dB A-Weighted 24 dB CCIR

Connectivity

Output Connectors	1 x XLR 3-Pin
Wireless Connectivity	None

Power

Operating Voltage	48 V ± 4 V
Operating Current Consumption	2 mA

Physical

Color	Black
Mounting	Mic Clip (with Included Hardware)
Construction Material	Metal
Storage Temperature	14 to 102°F / -10 to 70°C
Dimensions	ø: 0.75 x L: 9.84″ / ø: 19 x L: 249.94 mm
Weight	6.17 oz / 175 g (Microphone)

Packaging Info