Magewell USB Capture AIO : MY WAY VIDEO

Magewell 32110 Overview

The USB Capture AIO from Magewell is a 12-bit audio & video capture/playback device that supports USB 3.0, and allows you to capture 12-bit HDMI or analog audio. In addition, it supports RGB & YCbCr (YUV) color formats, supports customized EDID, and has integrated cable equalizer supporting cable lengths up to 754′ for HD-SDI signals. The USB 3.0 host interface is directly compatible with various editing applications such as VLC,VirtualDub, OBS, XSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, and Adobe Flash Media Encoder. It’s compatible with Windows and Linux systems.

Input

Auto scan of video input sources when there is no signal input to the currently selected input source
Manual selection of video input source
Auto selection of linked (embedded) audio input source when the video input source changes
Manual selection of audio input source
Support for input video resolutions up to 2048 x 2160

VGA & Component

12-bit ADC
Support for RGB & YCbCr (YUV) color formats
Support for Separated sync, Composite sync, SOG (Sync-on-Green), SOY (Sync-on-Luminance)
Support for DMT, CEA, CVT, GTF video timings
Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
Auto detection of RGB & YCbCr color formats
Auto or manual sampling phase adjustment
Auto horizontal alignment
Support for customized video timings
Support for customized video resolutions for CVT/GTF timings

HDMI

225MHz HDM receiver
Adaptive HDMI equalizer support for cables lengths up to 98’ (30m)
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut Info Frames
Full colorimetric support
Support for 8/10/12-bit color depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 2-channel IEC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode

SDI

Integrated cable equalizer supporting cable lengths up to 754’ (230m) for HD-SDI signals
Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
Support for 2K (2048 x 1080) mode
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for 10/12-bit color depth
Support for extraction of SMPTE 352 payload identifier
Support for up to 8 (mono) audio channels at 48 kHz
Support for extraction of audio formation information & channel status data
Limited support of 3Gb-DS: only the first stream can be captured
Limited support for capture of the first link of dual link interfaces: YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60, YCbCr 4:4:4 10-bit: captured as 4:2:2, RGB 4:4:4: R/B sub-sampled

YC & Composite

12-bit ADC
Support for NTSC, PAL, and SECAM standards
Auto detection of video input standard

Analog Audio

Capture analog audio via 3.5mm unbalanced Line In interface

Video Processing

Video processing pipelines with 160 Mp/s processing bandwidth
Video cropping
Video scaling
Video De-Interlacing: Weave, blend top & bottom field, top field only, bottom field only
Video Aspect Ratio Conversion: Auto or manual selection of input aspect ratio, auto or manual selection of capture aspect ratio, three aspect ratio conversion modes – Ignore (Anamorphic), cropping, or padding (Letterbox or Pillarbox)
Video Color Format Conversion: Auto or manual selection of input color format & quantization range, Auto or manual selection of capture color format, quantization range & saturation range, support for RGB, YCbCr 601, YCbCr 709 color formats, support for limited or full quantization range, support for limited, full & extended gamut saturation range
Video frame rate conversion
Vertical flip and mirror

Multiple Devices on One Computer

Support for connecting multiple USB devices to one system
Support for setting the device serial number as the device name shown in the system using USB Capture Utility

SDK

USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

Magewell 32110 Specs

Supported OS	Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux (Ubuntu 12.04-16.10, CentOS 7) Mac OS X 10.9-10.11 macOS 10.12
Supported APIs	Windows: DirectShow, Wave API/DirectSound/WASAPI Linux: V4L2, ALSA Mac OS X/macOS: QuickTime, AV Foundation
Supported Software	VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming software
Input Interface	DVI-I: DVI 1.0, HDMI 1.4a (via breakout cable), VGA (via DVI-to-VGA convertor), Component (via breakout cable) DB9: YC (S-Video), Composite video, Analog audio (L+R), Component video BNC: SD/HD/3G SDI
Host Interface	USB 3.0: Compatible with USB 2.0, compatible with USB 3.1 Gen 1
Video Capture Formats	Support for capture resolutions up to 2048 x 2160 Support for capture frame rates up to 120 fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency) Typical capture frame rates on the Intel USB 3.0 controller are as follows: 1920 x 1080 YUY2 (up to 75 fps), 1920 x 1080 RGB24 (up to 60 fps) Support for 4:2:2 8-bit Capture Format: YUY2, UYVY Support for 4:4:4 8-bit Capture Format: RGB24, RGB32 The default capture format is YUY2. More capture format can be set using USB Capture Utility
LED Indicator	Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Firmware Upgrade	Multiple devices in one system can be upgraded simultaneously
Power Consumption	5 V Maximum Current: 1 A Maximum Power Consumption： 5 W
Operating Temperature	32 to 113°F (0 to 45°C)
Storage Temperature	-4 to 158°F (-20 to 70°C)
Relative Humidity	5 to 90% non-condensing
Dimensions	3.8 x 3.8 x 0.9″ (98 x 98 x 25 mm)