Magewell Pro Capture HDMI 4K Capture Card (1-Channel) : MY WAY VIDEO


Magewell Pro Capture HDMI…




Add to Cart or Buy Product via WhatsApp

Available on backorder

Adicione ao Carrinho ou Compre pelo WhatsApp

Seeking a better price? Open a business account

Magewell Pro Capture HDMI 4K Overview


The Pro Capture HDMI 4K Capture Card from Magewell is a low-profile PCIe x4 card that allows for capturing a single channel of HDMI + embedded audio. The card supports extraction of audio formation information and channel status data, video timing information, 3D format information, and Sony/Canon DSLR timecode. The card is also capable of performing various video processing features, including cropping, scaling, deinterlacing, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition.

HDMI Features

  • 297 MHz HDMI receiver
  • Adaptive HDMI equalizer
  • Supports customized EDID
  • Supports extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut info frames
  • Full colorimetry support
  • Supports 8-bit signals that use RGB/YUV 4:4:4 color sampling at pixel rate no more than 297 MHz
  • Supports 12-bit signals that use YUV 4:2:2 color sampling at pixel rate no more than 297 MHz
  • Supports 10/12-bit signals that use RGB/YUV 4:4:4 color sampling at pixel rate no more than 170 MHz
  • Supports extraction of audio formation information and channel status data
  • Supports extraction of video timing information
  • Supports extraction of 3D format information
  • Supports extraction of Sony/Canon DSLR timecode
  • Supports side-by-side half, top-and-bottom, frame packing 3D mode

Video Processing Features

  • Two video processing pipelines with 360 MP/s processing bandwidth for each one
  • Full 10-bit video processing
  • Wave, blend top and bottom field, top field only, and bottom field only deinterlacing modes
  • Auto or manual selection of input and output aspect ratio
  • Three aspect ratio conversion modes (ignore (anamorphic), cropping, or padding (letterbox or pillarbox))
  • Auto or manual selection of input color format and quantization range
  • Auto or manual selection of output color format, quantization range, and saturation range
  • Supports RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
  • Supports limited or full quantization range
  • Supports limited, full, and extended gamut saturation range
  • Supports PNG OSD image (up to 4096 x 2160)
  • Supports dynamic loading of RGBA OSD image via SDK

Multiple Cards per System

  • Supports multiple cards in one system
  • On-board rotary switch to set card number, with 16 positions from 0 to F
  • System hardware device tree will display 01: Pro Capture AIO when rotary switch is set to 1, and so on
  • The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Capture Streams

  • Unlimited capture streams for any one input channel
  • Independent cropping, aspect ratio, color format, resolution, frame rate, deinterlacing, and color adjustment settings for each individual stream

Ultra-Low Latency Support

  • Latency of 64 video lines
  • Partial notification mode in SDK

Timestamp & AV Synchronization

  • Hardware-based 100ns high-resolution clock
  • Audio frames (192 audio samples) & video frames are stamped with hardware clock
  • Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

  • Supports auto detection of Intel tiled GPU surface
  • Supports DirectGMA for AMD video adapter chipsets
  • Supports GPUDirect for NVIDIA video adapter chipsets
  • 1200 MB/s per channel DMA bandwidth in PCIe 2.0 system and 800 MB/s per channel DMA bandwidth in PCIe 1.0 system


  • Pro Capture SDK for DirectShow for easy integration (Windows)
  • Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks

  • All options can be controlled by three levels of registry key: global level, product level, and device level
  • Video, audio, crossbar filter names can be customized via registry keys

Firmware Upgrade

  • Multiple cards in one system can be upgraded simultaneously
  • Cards can be upgraded without a system power shutdown (in most cases, even a reboot is not needed)

Magewell Pro Capture HDMI 4K Specs

Input Interface1 x HDMI
Supports DVI-D 1.0 (via separately available adapter) and HDMI 1.4
Output InterfacePCIe Gen2 x4
Supported OSWindows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (based on V4L2, supports x86, x64, and arm architecture)
Mac OS X (10.9 and above)
Supported APIsWindows: DirectShow, DirectKS, Wave API/DirectSound/WASAPI
Linux: V4L2, ALSA
Supported SoftwareVLC
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Video Output FormatSupports up to 4096 x 2160 output resolutions
Supports output frame rates up to 144 fps (actual output frame rate can be limited by PCIe bandwidth and image resolution)
Supports 4:2:0 8-bit output formats (NV12, I420, YV12)
Supports 4:2:2 8-bit output formats (YUY2, YUYV, UYVY)
Supports 4:4:4 8-bit output formats (V308, IYU2, V408, BGR24, BGR32)
Supports 4:4:4 10-bit output formats (V410, Y410)
More output formats are supported via Pro Capture SDK for DirectKS
Video Output SG-DMA1200 MB/s per channel DMA bandwidth in PCIe 2.0 system
800 MB/s per channel DMA bandwidth in PCIe 1.0 system
LED IndicatorStatus LEDs indicate the working state of each channel; idle, input signal locked, memory failed, or FPGA configuration failed
Power ConsumptionNot specified by the manufacturer
Operating Temperature32 to 104°F (0 to 40°C)
Storage Temperature-4 to 158°F (-20 to 70°C)
Relative Humidity5 to 90% non-condensing
Form FactorLow profile PCIe x4 add-on card
3.65 x 2.71″ (92.76 x 68.88 mm) without PCI bracket
Packaging Info
Package Weight0.4 lb
Box Dimensions (LxWxH)8.6 x 7.7 x 1.7″

Manuals & Guides

Weight0.4 lbs
Dimensions8.6 × 7.7 × 1.7 in

Best shipping prices to Brazil

Verify our shipping options on checkout