AJA OG-FS-Mini 3G-SDI Frame Synchronizer with DashBoard Support

• OpenGear compatible card
• Utility frame sync function times input signals to an ext. ref.
• Supports bi-level and tri-level references
• High quality 10-bit video processing
• Low latency processing, nominal video delay of 1 frame
• Freeze (on input signal loss) to black or last good frame
• Synchronizes 3G, HD and SD video formats
• Simultaneous SDI and HDMI outputs
• 16-channel embedded SDI audio I/O
• 8-channel HDMI output audio

EXTENDED WARRANTY IN LATIN AMERICA

$799.00

Out of stock

CHECK INTERNATIONAL SHIPMENT OPTIONS HERE

Seeking a better price? Open a business or dealer account

To negotiate additional discount, click the button below “ASK FOR A QUOTE“

SKU OG-FS-Mini Categories Signal Converter, Signal Processing, Transmission & Distribution, Video & Audio Processor

AJA OG-FS-Mini 3G-SDI Overview

OG-FS-Mini is an openGear broadcast quality utility frame sync that packs the production-proven reliability of AJA’s leading FS frame sync technology into an openGear card, supporting frame synchronization of untimed 3G-SDI, HD, and SD video signals at an affordable price.

OG-FS-Mini allows users to synchronize and convert a wide range of video formats to their house standard with a 3G-SDI input and output, HDMI output, and two 3-pin terminal block connectors for balanced analog audio outputs. The OG-FS-Mini also provides high quality up, down, cross-conversion.

OG-FS-Mini is designed for use in high-density openGear’s 2RU frames including AJA’s OG-X-FR frame. DashBoard software support on Windows®, macOS® and Linux offers remote control and monitoring of the openGear architecture and provides convenient and industry-standard configuration, monitoring and control options over a PC or local network.

AJA OG-FS-Mini Specs

Video Formats

(HD) 1920 x 1080p
(HD) 1920 x 1080PsF
(HD) 1920 x 1080i
(HD) 1280 x 720p
(SD) 625i
(SD) 525i
YCbCr, 4:2:2, 10-bit

Video Input Digital

1x 3G-SDI, 1x BNC
3G/HD/SD, SMPTE-259/292/372/424
- Single Link 3G-SDI Level A, SMPTE-425-1
(2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(2K) 2048 x 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1920 x 1080i 50, 59.94, 60
(HD) 1280 x 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94

Video Output Digital

1x 3G-SDI outputs, 1x BNC
3G/HD/SD, SMPTE-259/292/424
- Single Link 3G-SDI Level A, SMPTE-425-1
(HD) 1080p 23.98 (for 23.98 video inputs)
(HD) 1080p 24 (for 24 video inputs)
(HD) 1080p 25 (for 50 video inputs)
(HD) 1080p 29.97 (for 59.94 video inputs)
(HD) 1080p 30 (for 60 video inputs)
(HD) 1080p 50 (for 50 video inputs)
(HD) 1080p 59.94 (for 23.98, 59.94 video inputs)
(HD) 1080p 60 (for 24, 30 or 60 video inputs)
(HD) 1080PsF 23.98 (for 23.98 video inputs)
(HD) 1080PsF 24 (for 24 video inputs)
(HD) 1080PsF 25 (for 50 video inputs)
(HD) 1080PsF 29.97 (for 59.94 video inputs)
(HD) 1080Psf 30 (for 30 or 60 video inputs)
(HD) 1080i 59.94 (for 23.98, or 59.94 video inputs)
(HD) 1080i 60 (for 24, 30, or 60 video inputs)
(HD) 1080i 50 (for 25 or 50 video inputs)
(HD) 720p 50 (for 50 video inputs)
(HD) 720p 59.94 (for 23.98, 59.94 video inputs)
(HD) 720p 60 (for 24, 30, or 60 video inputs)
(SD) 625i 50 (for 25 or 50 fps video inputs)
(SD) 525i 59.94 (for 23.98 or 59.94 video inputs)

Monitor Output Digital

1x HDMI standard type A connector
- HD/SD
- Color space, YCbCr or RGB
- Bit depth, 8 or 10
- RGB Range, SMPTE or Full Range

Video Processing

Frame rate conversion/film cadence removal/insertion (3:2)
Freeze (on input signal loss) to black or last good frame
AFD input detection, down-convert control
Nominal video delay HD/SD, 1 frame

Up-Conversion

Hardware 10-bit
4×3 Pillar: results in a 4×3 image at center screen with black sidebars
14×9 Pillar: results in a 4×3 image zoomed slightly to fill a 14×9 image with black side bars
Full Screen: results in a 4×3 image stretched horizontally to fill in a 16×9 screen
Letterbox to Full: results in image zoomed to fill fullscreen
Wide Zoom: results in a combination of zoom and horizontal stretch to fill a 16×9 screen; this setting will introduce a small aspect ratio change

Down-Conversion

Hardware 10-bit
Crop: image is cropped to fit new screen size
Anamorphic: HD image is converted to full-screen SD with a 16×9 aspect ratio
14×9: image is reduced slightly with aspect ratio preserved, black is added top and bottom, and the left and right sides are cropped
Auto AFD: automatically selects the best down-convert mode based on the input video’s Active Format Description (AFD) code
Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved

Cross-Conversion

Hardware 10-bit
1080i to 720p
720p to 1080i
720p to 1080PsF

Aspect Ratio Converstion for
SD to SD

Letterbox: transforms SD anamorphic material to a letterboxed image
H Crop: produces a horizontally stretched effect on the image; transforms anamorphic SD to full frame
SD Pillarbox: produces an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
V Crop: transforms SD letterbox material to an anamorphic image
14×9: anamorphic to 14×9 conversion

Audio Input Digital

48 kHz sample rate
1x SDI embedded input
- 16-channels, 24-bit (20-bit SD), SMPTE-272/299

Audio Output Digital

48 kHz sample rate
1x SDI embedded output
- 16-channels, 24-bit (20-bit SD), SMPTE-272/299

Audio I/O

16-channel embedded SDI audio input
16-channel embedded SDI audio output
8-channel HDMI audio output
Balanced analog audio outputs, 2x 3-Pin terminal block connectors

Ancillary Data

Supports pass-through of PCM embedded audio
Supports pass-through of non-PCM audio when source is in time with the selected ref (SDI In or Ext Ref). Non-PCM audio is not supported during frame sync operation.
All other ANC data is not passed

Reference Input

Supported reference video inputs include:
- 1080i tri-level sync
- 1080p tri-level sync
- 720p tri-level sync
- 625i Color Black
- 525i Color Black
75-ohm terminating

Genlock

Lock to External Reference
Lock to SDI input
Free run

HDCP

The OG-FS-Mini does not encode the HDMI output with HDCP encryption. By definition, HD-SDI inputs to the OG-FS-Mini are unencrypted. The HDMI specification requires HDMI monitors to support unencrypted inputs.